Load samples through SCSI JAZ drive

[keys76]

Hi,

I wonder if it's allowed to disconnect a SCSI Jaz drive from the K2500 (still turned on) once you loaded your samples and everything into the K2500.

Jeroen

[ImaX]

The manual says you shouldn't - I don't know why. I'm pretty sure I did this some times when I tried to get the system to run, and nothing happened, but be careful.

You can switch off the zip while the kurz is still on...

[Enigma™]

It's discharge they're worried about - I've done it tonnes of times with a HD and CD-rom drive, no problems :)
Just be careful, make sure the power supply to the drives is OFF, and go for it :)