Keyplayer
08-01-2004, 03:50 PM
Hi again friend, well unfortunately the SP200 does not contain all the midi controller`s function but you can use in the next way.
1st set the midi net in the next way:
Sp200 midi out ------to---Behringer midi in
Behringer midi out/thru---------to---- yamaha midi in
yamaha midi out-------to-------roland midi in
ok set the yamaha master channel in " 1" and the roland master ch. in " 2 " and program the behringer to send data to this two channels.
Set eah of the pedals for send the program changes,control changes etc. etc. for the Yamaha and the Roland and now you can control with the behringer and with the piano. Due the piano does not have a multimbral mode you can only send data in channel 1 but you can use the layer function for send data to channels 1 & 2.
Now the secret it`s in the programation way , you nedd to program a combo that contains a blank file in the roland when you go for yamaha sounds and another balck file now in the yamaha for use with the roland you can combine this empty files for make an easy way to control all the gears without the sound of the other and you need to make the same in the piano for normal mode and a layer mode.
i hope this suggest can help you.
Due this topic it`s for another discussion i sugest you to send me a email o make another topic for some other question, maybe a "BFC1010 questions" topic
So, here's the new topic. :D
First, a lot of thanks to you, karmafield! I never thought about using the layer mode myself! But I don't understand what you said about controlling the piano. I'd really appreciate it if you could explane it a little further please.
Thans for the help again
Daan
1st set the midi net in the next way:
Sp200 midi out ------to---Behringer midi in
Behringer midi out/thru---------to---- yamaha midi in
yamaha midi out-------to-------roland midi in
ok set the yamaha master channel in " 1" and the roland master ch. in " 2 " and program the behringer to send data to this two channels.
Set eah of the pedals for send the program changes,control changes etc. etc. for the Yamaha and the Roland and now you can control with the behringer and with the piano. Due the piano does not have a multimbral mode you can only send data in channel 1 but you can use the layer function for send data to channels 1 & 2.
Now the secret it`s in the programation way , you nedd to program a combo that contains a blank file in the roland when you go for yamaha sounds and another balck file now in the yamaha for use with the roland you can combine this empty files for make an easy way to control all the gears without the sound of the other and you need to make the same in the piano for normal mode and a layer mode.
i hope this suggest can help you.
Due this topic it`s for another discussion i sugest you to send me a email o make another topic for some other question, maybe a "BFC1010 questions" topic
So, here's the new topic. :D
First, a lot of thanks to you, karmafield! I never thought about using the layer mode myself! But I don't understand what you said about controlling the piano. I'd really appreciate it if you could explane it a little further please.
Thans for the help again
Daan